The Screw,machine, cataloged under National Stock Number 5305-01-709-0444, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-709-0444 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN |
| Screw Surface Treatment | CADMIUM AND CHROMATE |
| Fastener Length | 1.766 INCHES MINIMUM AND 1.845 INCHES MAXIMUM IN |
| Thread Length | 1.734 INCHES MINIMUM AND 1.781 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS1801 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Width Between Flats | 0.305 INCHES MINIMUM AND 0.314 INCHES MAXIMUM IN |
| Screw Material | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Hole Quantity | 3 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Hole Configuration Style | HEXAGON CORNERS |
| Hole Type | DRILLED |
| Hole Diameter | 0.046 INCHES NOMINAL IN |
| Screw Surface Treatment Document and Classification | AMS-QQP-416, TYPE II, CLASS 2 ASSN STD SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1801-3D28 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-709-0444 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-709-0444: Head Height: 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN; Screw Surface Treatment: CADMIUM AND CHROMATE; Fastener Length: 1.766 INCHES MINIMUM AND 1.845 INCHES MAXIMUM IN; Thread Length: 1.734 INCHES MINIMUM AND 1.781 INCHES MAXIMUM IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.