The Screw,close Tolerance, cataloged under National Stock Number 5305-01-706-4777, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-706-4777 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.039 INCHES MAXIMUM IN |
| Fastener Length | 0.996 INCHES MINIMUM AND 1.026 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | AMS-QQ-P-416,TYPE II,CLASS 2. EMBRITTLEMENT REQUIREMENTS PER NAS 4002 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.323 INCHES NOMINAL IN |
| Material Document and Classification | AMS6382 NATIONAL STD/SPEC 1ST MATERIAL RESPONSE OR AMS6415 OR 6484 NATIONAL STD/SPEC 2ND MATERIAL RESPONSE OR AMS6322,6325 OR 6327 NATIONAL STD/SPEC 3RD MATERIAL RESPONSE OVERALL |
| Single Shear Strength | ERR-060 |
| Nominal Thread Diameter | 0.1640 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS8602 THRU NAS8616 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN |
| Grip Diameter | 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE III |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNJC |
| Head Diameter | 0.257 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS8602-11 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-706-4777 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-706-4777: Head Height: 0.039 INCHES MAXIMUM IN; Fastener Length: 0.996 INCHES MINIMUM AND 1.026 INCHES MAXIMUM IN; Surface Treatment Document and Classification: AMS-QQ-P-416,TYPE II,CLASS 2. EMBRITTLEMENT REQUIREMENTS PER NAS 4002 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.323 INCHES NOMINAL IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.