The Screw,tapping, cataloged under National Stock Number 5305-01-704-3905, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is The American Society of Mechanical Engineers. Government technical data includes 10 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-704-3905 |
| Primary Part Number | AESR5A190500CH2A11 |
| Item Name | Screw,tapping |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | The American Society of Mechanical Engineers |
| Status | ACTIVE |
| Nonmachine Nominal Thread Diameter | 0.190 INCHES IN |
| Head Height | 0.103 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN |
| Fastener Length | 0.500 INCHES NOMINAL IN |
| Nonmachine Thread Style | GIMLET POINT (TYPE A, AB OR BA) |
| Material Document and Classification | ASTM FS93, ALLOY GROUP 1, DEFAULT CONDITION CW NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | TRUSS |
| Specification/standard Data | 05047-ASME B18.24-2020 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Material | STEEL CORROSION RESISTING OVERALL |
| Head Diameter | 0.425 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| AESR5A190500CH2A11 PRIMARY | The American Society of Mechanical Engineers (USA) |
NSN 5305-01-704-3905 is a Screw,tapping, manufactured by The American Society of Mechanical Engineers, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-704-3905 has 1 manufacturer part number on file: AESR5A190500CH2A11 (The American Society of Mechanical Engineers).
Key specifications for AESR5A190500CH2A11: Nonmachine Nominal Thread Diameter: 0.190 INCHES IN; Head Height: 0.103 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN; Fastener Length: 0.500 INCHES NOMINAL IN; Nonmachine Thread Style: GIMLET POINT (TYPE A, AB OR BA). 10 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.