The Screw,close Tolerance, cataloged under National Stock Number 5305-01-702-2401, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-702-2401 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES OVERALL |
| Head Height | 0.083 INCHES NOMINAL IN |
| Fastener Length | 0.598 INCHES MINIMUM AND 0.628 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | AMS-QQ-P-416, TYPE II, CLASS 2 INTERNATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.363 INCHES NOMINAL IN |
| Material Document and Classification | AMS5731, AMS5732, AMS5737 OR AMS5853 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE OVERALL |
| Spline Major Diameter | 0.155 INCHES NOMINAL IN |
| Single Shear Strength | ERR-060 |
| Nominal Thread Diameter | 0.1900 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS5319 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Grip Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 22 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | TORX |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | IRON ALLOY 660 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.3390 INCHES MINIMUM AND 0.3813 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS5319E3P4 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-702-2401 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-702-2401: Surface Finish: 32.0 MICROINCHES OVERALL; Head Height: 0.083 INCHES NOMINAL IN; Fastener Length: 0.598 INCHES MINIMUM AND 0.628 INCHES MAXIMUM IN; Surface Treatment Document and Classification: AMS-QQ-P-416, TYPE II, CLASS 2 INTERNATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL. 23 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.