The Screw,machine, cataloged under National Stock Number 5305-01-700-8574, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 24 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-700-8574 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.080 INCHES NOMINAL IN |
| Bearing Surface of Head Surface Treatment Document and Classification | QQ-P-416, TYPE II, CLASS 2 MIL STD ALL TREATMENT RESPONSES |
| Screw Surface Treatment | CADMIUM |
| Fastener Length | 0.6565 INCHES MINIMUM AND 0.6875 INCHES MAXIMUM IN |
| Screw Material Document and Classification | AMS5737 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES |
| Thread Length | 0.0160 INCHES NOMINAL IN |
| Shank Surface Treatment | CADMIUM |
| Bearing Surface of Head Surface Treatment | CADMIUM |
| Nominal Thread Diameter | 0.1900 INCHES IN |
| Head Surface Treatment | CADMIUM |
| Head Style | FILLISTER COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS1102 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Head Surface Treatment Document and Classification | QQ-P-416, TYPE II, CLASS 2 MIL STD ALL TREATMENT RESPONSES |
| Screw Material | STEEL CORROSION RESISTING |
| Minimum Tensile Strength | 3180 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Shank Surface Treatment Document and Classification | QQ-P-416, TYPE II, CLASS 2 MIL STD ALL TREATMENT RESPONSES |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.371 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416, TYPE II, CLASS 2 MIL STD ALL TREATMENT RESPONSES |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1102E3-11P | 3/2 Design control — primary reference U.S. Government activity |
| NAS1102 REV 9 | D/9 Drawing number reference only U.S. Government activity |
NSN 5305-01-700-8574 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-700-8574: Head Height: 0.080 INCHES NOMINAL IN; Bearing Surface of Head Surface Treatment Document and Classification: QQ-P-416, TYPE II, CLASS 2 MIL STD ALL TREATMENT RESPONSES; Screw Surface Treatment: CADMIUM; Fastener Length: 0.6565 INCHES MINIMUM AND 0.6875 INCHES MAXIMUM IN. 24 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.