PartsTable TECHNICAL DATA SHEET
NSN 5305-01-700-5257Government record, cited

Screw, Machine5305-01-700-5257

NSN 5305-01-700-5257 · NIIN 017005257
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-01-700-5257 · 5305017005257 · NIIN 017005257 · 01-700-5257 · FSC 5305 Screws
Nearby stock numbers  ·
Features
  • Screw,machine — FSC 5305
  • Head Height: 0.186 INCHES NOMINAL IN
  • Screw Surface Treatment: CADMIUM
  • Fastener Length: 1.750 INCHES MINIMUM AND 1.780 INCHES MAXIMUM IN
  • Screw Material Document and Classification: AMS 6382 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6415,6484 OR 8740 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6327,6322 OR 6325 ASSN STD 3RD MATERIAL RESPONSE
  • Thread Length: 0.453 INCHES NOMINAL IN
  • Shank Unthreaded Hole Diameter: 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM OVERALL IN
  • Nominal Thread Diameter: 0.4375 INCHES IN
Identification
  • NSN: 5305-01-700-5257
  • NIIN: 017005257
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,machine, cataloged under National Stock Number 5305-01-700-5257, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-700-5257
Item NameScrew,machine
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Head Height0.186 INCHES NOMINAL IN
Screw Surface TreatmentCADMIUM
Fastener Length1.750 INCHES MINIMUM AND 1.780 INCHES MAXIMUM IN
Screw Material Document and ClassificationAMS 6382 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6415,6484 OR 8740 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6327,6322 OR 6325 ASSN STD 3RD MATERIAL RESPONSE
Thread Length0.453 INCHES NOMINAL IN
Shank Unthreaded Hole Diameter0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM OVERALL IN
Nominal Thread Diameter0.4375 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Specification/standard Data80205-NAS1620 THRU NAS1628 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
Screw MaterialSTEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740
Minimum Tensile Strength160000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleOFFSET CRUCIFORM (TORQUE SET)
Countersink Angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
Thread Class3A A
Thread Quantity Per Inch20
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Distance From Head Largest Bearing Surface to Shank Hole Center1.641 INCHES NOMINAL OVERALL IN
Head Diameter0.874 INCHES MINIMUM AND 0.894 INCHES MAXIMUM IN
Screw Surface Treatment Document and ClassificationAMS-QQ-P-416,TYPE II,CLASS 2 ASSN STD SINGLE TREATMENT RESPONSE
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
NAS1627-21D 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-700-5257?

NSN 5305-01-700-5257 is a Screw,machine, classified under FSC 5305, Screws. Status: active.

What are the specifications of 5305-01-700-5257?

Key specifications for 5305-01-700-5257: Head Height: 0.186 INCHES NOMINAL IN; Screw Surface Treatment: CADMIUM; Fastener Length: 1.750 INCHES MINIMUM AND 1.780 INCHES MAXIMUM IN; Screw Material Document and Classification: AMS 6382 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6415,6484 OR 8740 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6327,6322 OR 6325 ASSN STD 3RD MATERIAL RESPONSE. 20 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-700-5257 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com