The Screw,machine, cataloged under National Stock Number 5305-01-699-6777, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-699-6777 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.045 INCHES NOMINAL IN |
| Screw Surface Treatment | CADMIUM |
| Fastener Length | 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Screw Material Document and Classification | AMS 5731,5732,5737 AND 5853 ASSN STD SINGLE MATERIAL RESPONSE |
| Thread Length | 0.705 INCHES NOMINAL IN |
| Nominal Thread Diameter | 0.1120 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS5312 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Screw Material | STEEL CORROSION RESISTING |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | TORX |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 40 |
| Thread Series Designator | UNJC |
| Head Diameter | 0.213 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | AMS-QQ-P-416,TYPE II,CLASS 2 ASSN STD SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS5312E04P12 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-699-6777 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-699-6777: Head Height: 0.045 INCHES NOMINAL IN; Screw Surface Treatment: CADMIUM; Fastener Length: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN; Screw Material Document and Classification: AMS 5731,5732,5737 AND 5853 ASSN STD SINGLE MATERIAL RESPONSE. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.