The Screw,close Tolerance, cataloged under National Stock Number 5305-01-699-2429, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Huck International, Inc. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 4 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-699-2429 |
| Primary Part Number | HO44B4-13R |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Huck International, Inc |
| Status | ACTIVE |
| Head Height | 0.108 INCHES NOMINAL IN |
| Fastener Length | 1.1825 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | MIL-C-83488, TYPE II, CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.370 INCHES NOMINAL IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | AMS6487 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Features Provided | DRY FILM LUBRICANT |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.8125 INCHES NOMINAL IN |
| Grip Diameter | 0.2641 INCHES MINIMUM AND 0.2651 INCHES MAXIMUM IN |
| Surface Treatment | ALUMINUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.447 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HO44B4-13R PRIMARY | Huck International, Inc (USA) |
| AIC984B4-13R PRIMARY | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| 122557-4-A13BX PRIMARY | Sps Technologies, Llc Dba PB Fasteners (USA) |
| VT1693AS4-13X PRIMARY | Howmet Global Fastening Systems Inc (USA) |
| Reference | Meaning |
|---|---|
| VT1693AS4-13X | 3/2 Design control — primary reference U.S. Government activity |
| C7984B4-13R | 7/2 Vendor item drawing reference U.S. Government activity |
| 121557-4-A13BX | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-699-2429 is a Screw,close Tolerance, manufactured by Huck International, Inc, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-699-2429 has 4 manufacturer part numbers on file: HO44B4-13R (Huck International, Inc), AIC984B4-13R (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company), 122557-4-A13BX (Sps Technologies, Llc Dba PB Fasteners), VT1693AS4-13X (Howmet Global Fastening Systems Inc).
Key specifications for HO44B4-13R: Head Height: 0.108 INCHES NOMINAL IN; Fastener Length: 1.1825 INCHES NOMINAL IN; Surface Treatment Document and Classification: MIL-C-83488, TYPE II, CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.370 INCHES NOMINAL IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.