The Screw,close Tolerance, cataloged under National Stock Number 5305-01-697-9236, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-697-9236 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Fastener Length | 0.6355 INCHES MINIMUM AND 0.6655 INCHES MAXIMUM IN |
| Thread Length | 0.338 INCHES NOMINAL IN |
| Material Document and Classification | AMS 4928 OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Spline Major Diameter | 0.155 INCHES NOMINAL IN |
| Nominal Thread Diameter | 0.1640 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS5319 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 0.3025 INCHES MINIMUM AND 0.3225 INCHES MAXIMUM IN |
| Grip Diameter | 0.1630 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM IN |
| Minimum Tensile Strength | 95000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | TORX |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | TITANIUM ALLOY UNS R56400 OVERALL |
| Thread Series Designator | UNJC |
| Head Diameter | 0.294 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS5319V08-5 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-697-9236 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-697-9236: Surface Finish: 32.0 MICROINCHES THREADS; Fastener Length: 0.6355 INCHES MINIMUM AND 0.6655 INCHES MAXIMUM IN; Thread Length: 0.338 INCHES NOMINAL IN; Material Document and Classification: AMS 4928 OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.