The Screw,machine, cataloged under National Stock Number 5305-01-691-9825, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-691-9825 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN |
| Head Height | 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN |
| Screw Surface Treatment | CADMIUM AND CHROMATE |
| Fastener Length | 1.3375 INCHES MINIMUM AND 1.4375 INCHES MAXIMUM IN |
| Thread Length | 1.2435 INCHES MINIMUM AND 1.4375 INCHES MAXIMUM IN |
| Hardness Rating | 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM |
| Nominal Thread Diameter | 0.500 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Screw Material | STEEL |
| Minimum Tensile Strength | 170000 POUNDS PER SQUARE INCH LBS |
| Chamfer Angle | 30.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM |
| Internal Drive Style | HEXAGON |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 13 |
| Thread Series Designator | UNRC |
| Head Diameter | 0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1352-8-23P | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-691-9825 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-691-9825: Width Across Flats: 0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN; Head Height: 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN; Screw Surface Treatment: CADMIUM AND CHROMATE; Fastener Length: 1.3375 INCHES MINIMUM AND 1.4375 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.