The Screw,close Tolerance, cataloged under National Stock Number 5305-01-682-7250, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 10 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-682-7250 |
| Primary Part Number | AIC985B3-7R |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Fastener Length | 0.826 INCHES MINIMUM AND 0.856 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-C-83488, TYPE 2, CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.378 INCHES MINIMUM AND 0.428 INCHES MAXIMUM IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.2500 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN |
| Grip Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Surface Treatment | ALUMINUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 3740 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.258 INCHES MINIMUM AND 0.305 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| AIC985B3-7R PRIMARY | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| Reference | Meaning |
|---|---|
| C7985B3-7R | 7/2 Vendor item drawing reference U.S. Government activity |
| SF117B3-7R | 5/9 Secondary reference Saturn Fasteners Inc |
| 121558-3-A7BX | 5/9 Secondary reference U.S. Government activity |
| VT1694AS3-7X | 5/9 Secondary reference U.S. Government activity |
| VT1694AS36R | 5/9 Secondary reference U.S. Government activity |
| H185B3-7R | 5/9 Secondary reference Huck International, Inc |
| 121558-3-A7BX | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| VT1694AS3-7X | 5/9 Secondary reference Howmet Global Fastening Systems Inc |
| VT1694AS37R | 5/9 Secondary reference Howmet Global Fastening Systems Inc |
| H185B3-7R | 5/9 Secondary reference U.S. Government activity |
NSN 5305-01-682-7250 is a Screw,close Tolerance, manufactured by Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-682-7250 has 1 manufacturer part number on file: AIC985B3-7R (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company).
1 possible match (shared part number, not a government interchangeability claim): 5305-01-683-3886. Verify interchangeability with system specifications before substitution.
Key specifications for AIC985B3-7R: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Fastener Length: 0.826 INCHES MINIMUM AND 0.856 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-C-83488, TYPE 2, CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.