The Screw,close Tolerance, cataloged under National Stock Number 5305-01-681-9970, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Howmet Global Fastening Systems Inc. Government technical data includes 23 specifications, cited from the U.S. Government catalog. The record lists 4 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-681-9970 |
| Primary Part Number | VT1694AS4-5X |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Howmet Global Fastening Systems Inc |
| Status | ACTIVE |
| Head Height | 0.063 INCHES NOMINAL IN |
| Point Length | 0.045 INCHES NOMINAL IN |
| Fastener Length | 0.7155 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | MIL-C-83488 TYPE II, CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.403 INCHES NOMINAL IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | AMS-6487 NATIONAL STD SINGLE MATERIAL RESPONSE OVERALL |
| Point Chamfer Angle | 45.0 DEGREES NOMINAL |
| Nominal Thread Diameter | 0.2500 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Point Style | FLAT |
| Grip Length | 0.3125 INCHES NOMINAL IN |
| Grip Diameter | 0.2641 INCHES MINIMUM AND 0.2651 INCHES MAXIMUM IN |
| Surface Treatment | ALUMINUM OVERALL |
| Minimum Tensile Strength | 3740 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.350 INCHES MINIMUM AND 0.399 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| VT1694AS4-5X PRIMARY | Howmet Global Fastening Systems Inc (USA) |
| 121558-4-A5BX PRIMARY | Sps Technologies, Llc Dba PB Fasteners (USA) |
| AIC985B4-5R PRIMARY | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| H185B4-5R PRIMARY | Huck International, Inc (USA) |
| Reference | Meaning |
|---|---|
| VT1694AS4-5X | 3/2 Design control — primary reference U.S. Government activity |
| 121558-4-A5BX | 3/2 Design control — primary reference U.S. Government activity |
| 985B4-5R | C/1 Advisory reference — outside the item-of-supply concept Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company |
| C7985B4-5R | 7/2 Vendor item drawing reference U.S. Government activity |
| AIC985-4-5BR | 5/9 Secondary reference Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company |
NSN 5305-01-681-9970 is a Screw,close Tolerance, manufactured by Howmet Global Fastening Systems Inc, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-681-9970 has 4 manufacturer part numbers on file: VT1694AS4-5X (Howmet Global Fastening Systems Inc), 121558-4-A5BX (Sps Technologies, Llc Dba PB Fasteners), AIC985B4-5R (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company), H185B4-5R (Huck International, Inc).
Key specifications for VT1694AS4-5X: Head Height: 0.063 INCHES NOMINAL IN; Point Length: 0.045 INCHES NOMINAL IN; Fastener Length: 0.7155 INCHES NOMINAL IN; Surface Treatment Document and Classification: MIL-C-83488 TYPE II, CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL. 23 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.