The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-680-9003, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-680-9003 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.500 INCHES NOMINAL IN |
| Head Height | 0.396 INCHES NOMINAL IN |
| Fastener Length | 1.94 INCHES MINIMUM AND 2.00 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | ASTM B633,TYPE II,CLASS FE/ZN 5 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 1.94 INCHES MINIMUM AND 2.00 INCHES MAXIMUM IN |
| Material Document and Classification | FF-S-86 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.7500 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | ZINC OVERALL |
| Internal Drive Style | HEXAGON |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 10 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 1.355 INCHES MINIMUM AND 1.438 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS24667-96Z | 5/9 Secondary reference U.S. Government activity |
| MS24667-96Z | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-680-9003 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-680-9003: Width Across Flats: 0.500 INCHES NOMINAL IN; Head Height: 0.396 INCHES NOMINAL IN; Fastener Length: 1.94 INCHES MINIMUM AND 2.00 INCHES MAXIMUM IN; Surface Treatment Document and Classification: ASTM B633,TYPE II,CLASS FE/ZN 5 ASSN STD SINGLE TREATMENT RESPONSE OVERALL. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.