The Screw,machine, cataloged under National Stock Number 5305-01-671-6357, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-671-6357 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Fastener Length | 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN |
| Screw Material Document and Classification | AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE |
| Thread Length | 0.352 INCHES MINIMUM AND 0.466 INCHES MAXIMUM IN |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS514 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Screw Material | STEEL COMP 4130 OR STEEL COMP 4340 OR STEEL COMP 8740 |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.686 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS514P624-10 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-671-6357 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-671-6357: Fastener Length: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN; Screw Material Document and Classification: AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE; Thread Length: 0.352 INCHES MINIMUM AND 0.466 INCHES MAXIMUM IN; Hardness Rating: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.