The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-663-4775, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is International Organization for Standardization (iso). Government technical data includes 13 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-663-4775 |
| Primary Part Number | ISO 10642 M6X20-V4A |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | International Organization for Standardization (iso) |
| Status | ACTIVE |
| Width Across Flats | 4.02 MILLIMETERS MINIMUM AND 4.09 MILLIMETERS MAXIMUM MM |
| Fastener Length | 23.3 MILLIMETERS NOMINAL MM |
| Thread Pitch in Millimeters | 6.0 |
| Thread Length | 20.0 MILLIMETERS NOMINAL MM |
| Nominal Thread Diameter | 6.0 MILLIMETERS MM |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | I9008-ISO10642 NATIONAL STD/SPEC |
| Internal Drive Style | HEXAGON |
| Countersink Angle | 90.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM |
| Material | STEEL CORROSION RESISTING OVERALL |
| Thread Series Designator | M |
| Head Diameter | 11.34 MILLIMETERS MINIMUM AND 13.44 MILLIMETERS MAXIMUM MM |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| ISO 10642 M6X20-V4A PRIMARY | International Organization for Standardization (iso) (CHE) |
NSN 5305-01-663-4775 is a Screw,cap,socket Head, manufactured by International Organization for Standardization (iso), classified under FSC 5305, Screws. Status: active.
NSN 5305-01-663-4775 has 1 manufacturer part number on file: ISO 10642 M6X20-V4A (International Organization for Standardization (iso)).
Key specifications for ISO 10642 M6X20-V4A: Width Across Flats: 4.02 MILLIMETERS MINIMUM AND 4.09 MILLIMETERS MAXIMUM MM; Fastener Length: 23.3 MILLIMETERS NOMINAL MM; Thread Pitch in Millimeters: 6.0; Thread Length: 20.0 MILLIMETERS NOMINAL MM. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.