The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-662-1203, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-662-1203 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Fastener Length | 0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.0860 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | CADMIUM AND CHROMIUM OVERALL |
| Internal Drive Style | CRUCIFORM RIBBED |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 56 |
| Material | STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OVERALL |
| Thread Series Designator | UNJC |
| Head Diameter | 0.162 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1189-02P3J | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-662-1203 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-662-1203: Fastener Length: 0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN; Nominal Thread Diameter: 0.0860 INCHES IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.