The Screw,machine, cataloged under National Stock Number 5305-01-657-9039, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-657-9039 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Extended Washer Thickness | 0.030 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN |
| Head Height | 0.085 INCHES MINIMUM AND 0.105 INCHES MAXIMUM IN |
| Screw Surface Treatment | CADMIUM |
| Fastener Length | 0.35 INCHES MINIMUM AND 0.38 INCHES MAXIMUM IN |
| Extended Washer Diameter | 0.413 INCHES MINIMUM AND 0.443 INCHES MAXIMUM IN |
| Thread Length | 0.35 INCHES MINIMUM AND 0.38 INCHES MAXIMUM IN |
| Shank Surface Treatment | CADMIUM |
| Bearing Surface of Head Surface Treatment | CADMIUM |
| Nominal Thread Diameter | 0.1900 INCHES IN |
| Head Surface Treatment | CADMIUM |
| Head Style | ROUND EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL COMP 4340 OR STEEL COMP 8740 |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.343 INCHES MINIMUM AND 0.363 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS8303-6 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-657-9039 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-657-9039: Extended Washer Thickness: 0.030 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN; Head Height: 0.085 INCHES MINIMUM AND 0.105 INCHES MAXIMUM IN; Screw Surface Treatment: CADMIUM; Fastener Length: 0.35 INCHES MINIMUM AND 0.38 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.