The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-653-3196, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is International Organization for Standardization (iso). Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-653-3196 |
| Primary Part Number | ISO10642-M12X35-10.9-A2D |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | International Organization for Standardization (iso) |
| Status | ACTIVE |
| Surface Finish | 5.0 MICROMETERS OVERALL |
| Width Across Flats | 8.0 MILLIMETERS NOMINAL MM |
| Fastener Length | 34.5 MILLIMETERS MINIMUM AND 35.5 MILLIMETERS MAXIMUM MM |
| Thread Pitch in Millimeters | 1.75 |
| Thread Length | 28.06 MILLIMETERS MINIMUM MM |
| Nominal Thread Diameter | 12.0 MILLIMETERS MM |
| Features Provided | DULL FINISH |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | ZINC OVERALL |
| Internal Drive Style | HEXAGON |
| Countersink Angle | 90.0 DEGREES NOMINAL |
| Thread Class | 6G G |
| Material | STEEL PROPERTY CLASS 10.9 OVERALL |
| Thread Series Designator | M |
| Head Diameter | 23.12 MILLIMETERS MINIMUM MM |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| ISO10642-M12X35-10.9-A2D PRIMARY | International Organization for Standardization (iso) (CHE) |
NSN 5305-01-653-3196 is a Screw,cap,socket Head, manufactured by International Organization for Standardization (iso), classified under FSC 5305, Screws. Status: active.
NSN 5305-01-653-3196 has 1 manufacturer part number on file: ISO10642-M12X35-10.9-A2D (International Organization for Standardization (iso)).
Key specifications for ISO10642-M12X35-10.9-A2D: Surface Finish: 5.0 MICROMETERS OVERALL; Width Across Flats: 8.0 MILLIMETERS NOMINAL MM; Fastener Length: 34.5 MILLIMETERS MINIMUM AND 35.5 MILLIMETERS MAXIMUM MM; Thread Pitch in Millimeters: 1.75. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.