PartsTable TECHNICAL DATA SHEET
NSN 5305-01-627-2954Government record, cited

Screw, Close Tolerance5305-01-627-2954

NSN 5305-01-627-2954 · NIIN 016272954 · Part number HT4069-5-11A
Hi-Shear Corporation · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 73197
Government record, cited
NSN 5305-01-627-2954 — this item is cataloged by the U.S. Government under National Stock Number 5305-01-627-2954. Manufacturer of record part number: HT4069-5-11A.
Also searched as  5305-01-627-2954 · 5305016272954 · NIIN 016272954 · 01-627-2954 · FSC 5305 Screws · CAGE 73197 · HT4069-5-11A · 3M927-5L11
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Head Height: 0.071 INCHES NOMINAL IN
  • Point Length: 0.052 INCHES NOMINAL IN
  • Fastener Length: 1.219 INCHES NOMINAL IN
  • Surface Treatment Document and Classification: MIL-C-83488 TYPE II CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.531 INCHES NOMINAL IN
  • Shank Unthreaded Hole Diameter: 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM THREADS IN
  • Hole Configuration Style: ROUND
Identification
  • NSN: 5305-01-627-2954
  • NIIN: 016272954
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: HT4069-5-11A
  • Manufacturer: Hi-Shear Corporation
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-01-627-2954, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 26 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-627-2954
Primary Part NumberHT4069-5-11A
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
ManufacturerHi-Shear Corporation
StatusACTIVE
Head Height0.071 INCHES NOMINAL IN
Point Length0.052 INCHES NOMINAL IN
Fastener Length1.219 INCHES NOMINAL IN
Surface Treatment Document and ClassificationMIL-C-83488 TYPE II CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.531 INCHES NOMINAL IN
Shank Unthreaded Hole Diameter0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM THREADS IN
Hole Configuration StyleROUND
Point Chamfer Angle45.0 DEGREES NOMINAL
Nominal Thread Diameter0.3125 INCHES IN
Features ProvidedCETYL ALCOHOL LUBRICANT
Head StyleFLAT CHAMFER
Thread DirectionRIGHT-HAND
Point StyleFLAT
Grip Length0.688 INCHES NOMINAL IN
Grip Diameter0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
Surface TreatmentALUMINUM OVERALL
Internal Drive StyleHIGH-TORQUE
Thread Class3A A
Thread Quantity Per Inch24
MaterialNICKEL ALLOY 718 OVERALL
Hole Quantity1
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Distance From Head Largest Bearing Surface to Shank Hole Center1.095 INCHES MINIMUM AND 1.105 INCHES MAXIMUM THREADS IN
Hole TypeDRILLED
Hole Diameter0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
Head Diameter0.429 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
HT4069-5-11A PRIMARY Hi-Shear Corporation (USA)
HT4069-5-11A Sps Technologies, Llc Dba PB Fasteners (USA)
Reference documents
ReferenceMeaning
HT4069-5-11A 5/2 Secondary reference
U.S. Government activity
3M927-5L11 7/2 Vendor item drawing reference
The Boeing Company Div Defense
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-627-2954?

NSN 5305-01-627-2954 is a Screw,close Tolerance, manufactured by Hi-Shear Corporation, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-01-627-2954?

NSN 5305-01-627-2954 has 2 manufacturer part numbers on file: HT4069-5-11A (Hi-Shear Corporation), HT4069-5-11A (Sps Technologies, Llc Dba PB Fasteners).

What are the specifications of HT4069-5-11A?

Key specifications for HT4069-5-11A: Head Height: 0.071 INCHES NOMINAL IN; Point Length: 0.052 INCHES NOMINAL IN; Fastener Length: 1.219 INCHES NOMINAL IN; Surface Treatment Document and Classification: MIL-C-83488 TYPE II CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL. 26 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-627-2954 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com