PartsTable TECHNICAL DATA SHEET
NSN 5305-01-626-8202Government record, cited

Screw, Close Tolerance5305-01-626-8202

NSN 5305-01-626-8202 · NIIN 016268202 · Part number HT4069-6-13A
Hi-Shear Corporation · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 73197
Government record, cited
NSN 5305-01-626-8202 — this item is cataloged by the U.S. Government under National Stock Number 5305-01-626-8202. Manufacturer of record part number: HT4069-6-13A.
Also searched as  5305-01-626-8202 · 5305016268202 · NIIN 016268202 · 01-626-8202 · FSC 5305 Screws · CAGE 73197 · HT4069-6-13A · 3M927-6L13 · WC4069-6-13
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Fastener Length: 1.438 INCHES MINIMUM AND 1.468 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: MIL-DTL-83488, TYPE II, CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.641 INCHES NOMINAL IN
  • Shank Unthreaded Hole Diameter: 0.106 INCHES MINIMUM AND 0.111 INCHES MAXIMUM OVERALL IN
  • Material Document and Classification: AMS 5662 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
  • Nominal Thread Diameter: 0.3750 INCHES IN
  • Features Provided: CETYL ALCOHOL LUBRICANT
Identification
  • NSN: 5305-01-626-8202
  • NIIN: 016268202
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: HT4069-6-13A
  • Manufacturer: Hi-Shear Corporation
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-01-626-8202, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-626-8202
Primary Part NumberHT4069-6-13A
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
ManufacturerHi-Shear Corporation
StatusACTIVE
Fastener Length1.438 INCHES MINIMUM AND 1.468 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationMIL-DTL-83488, TYPE II, CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.641 INCHES NOMINAL IN
Shank Unthreaded Hole Diameter0.106 INCHES MINIMUM AND 0.111 INCHES MAXIMUM OVERALL IN
Material Document and ClassificationAMS 5662 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.3750 INCHES IN
Features ProvidedCETYL ALCOHOL LUBRICANT
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Grip Length0.812 INCHES NOMINAL IN
Grip Diameter0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN
Surface TreatmentALUMINUM OVERALL
Internal Drive StyleHIGH-TORQUE
Countersink Angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
Thread Class3A A
Thread Quantity Per Inch24
MaterialNICKEL ALLOY 718 OVERALL
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Distance From Head Largest Bearing Surface to Shank Hole Center1.338 INCHES MINIMUM AND 1.343 INCHES MAXIMUM OVERALL IN
Head Diameter0.510 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
HT4069-6-13A Sps Technologies, Llc Dba PB Fasteners (USA)
HT4069-6-13A PRIMARY Hi-Shear Corporation (USA)
WC4069-6-13 West Coast Aerospace, Inc. (USA)
Reference documents
ReferenceMeaning
HT4069-6-13A 5/2 Secondary reference
U.S. Government activity
3M927-6L13 7/2 Vendor item drawing reference
The Boeing Company Div Defense
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-626-8202?

NSN 5305-01-626-8202 is a Screw,close Tolerance, manufactured by Hi-Shear Corporation, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-01-626-8202?

NSN 5305-01-626-8202 has 3 manufacturer part numbers on file: HT4069-6-13A (Sps Technologies, Llc Dba PB Fasteners), HT4069-6-13A (Hi-Shear Corporation), WC4069-6-13 (West Coast Aerospace, Inc.).

What are the specifications of HT4069-6-13A?

Key specifications for HT4069-6-13A: Fastener Length: 1.438 INCHES MINIMUM AND 1.468 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-DTL-83488, TYPE II, CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.641 INCHES NOMINAL IN; Shank Unthreaded Hole Diameter: 0.106 INCHES MINIMUM AND 0.111 INCHES MAXIMUM OVERALL IN. 20 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-626-8202 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com