PartsTable TECHNICAL DATA SHEET
NSN 5305-01-626-8200Government record, cited

Screw, Close Tolerance5305-01-626-8200

NSN 5305-01-626-8200 · NIIN 016268200 · Part number ST3M736-5-10
The Boeing Company Div Defense · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 76301
Government record, cited
NSN 5305-01-626-8200 — this item is cataloged by the U.S. Government under National Stock Number 5305-01-626-8200. Manufacturer of record part number: ST3M736-5-10.
Also searched as  5305-01-626-8200 · 5305016268200 · NIIN 016268200 · 01-626-8200 · FSC 5305 Screws · CAGE 76301 · ST3M736-5-10 · 121672-5-10
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Surface Finish: 63.0 MICROINCHES GRIP
  • Surface Finish: 63.0 MICROINCHES BEARING SURFACE OF HEAD
  • Fastener Length: 1.113 INCHES NOMINAL IN
  • Surface Treatment Document and Classification: QQ-P-416, TYPE II, CLASS 2 FED STD SINGLE TREATMENT RESPONSE OVERALL
  • Surface Treatment Document and Classification: QQ-P-35 FED STD SINGLE TREATMENT RESPONSE RING
  • Thread Length: 0.337 INCHES MINIMUM AND 0.368 INCHES MAXIMUM IN
  • Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM OVERALL
Identification
  • NSN: 5305-01-626-8200
  • NIIN: 016268200
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: ST3M736-5-10
  • Manufacturer: The Boeing Company Div Defense
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-01-626-8200, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is The Boeing Company Div Defense. Government technical data includes 27 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-626-8200
Primary Part NumberST3M736-5-10
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
ManufacturerThe Boeing Company Div Defense
StatusACTIVE
Surface Finish63.0 MICROINCHES GRIP
Surface Finish63.0 MICROINCHES BEARING SURFACE OF HEAD
Fastener Length1.113 INCHES NOMINAL IN
Surface Treatment Document and ClassificationQQ-P-416, TYPE II, CLASS 2 FED STD SINGLE TREATMENT RESPONSE OVERALL
Surface Treatment Document and ClassificationQQ-P-35 FED STD SINGLE TREATMENT RESPONSE RING
Thread Length0.337 INCHES MINIMUM AND 0.368 INCHES MAXIMUM IN
Hardness Rating36.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM OVERALL
Shank Unthreaded Hole Diameter0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM OVERALL IN
Material Document and ClassificationAMS5643 FED SPEC SINGLE MATERIAL RESPONSE RING
Nominal Thread Diameter0.3125 INCHES IN
Head StyleOVAL COUNTERSUNK
Thread DirectionRIGHT-HAND
Grip Length0.625 INCHES NOMINAL IN
Grip Diameter0.3108 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM IN
Locking FeatureRETAINER RING
Surface TreatmentPASSIVATE RING
Surface TreatmentCADMIUM OVERALL
Minimum Tensile Strength7510 POUNDS PER SQUARE INCH LBS
Internal Drive StyleHIGH-TORQUE
Countersink Angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
Thread Class3A A
Thread Quantity Per Inch24
MaterialSTEEL COMP 4140 OVERALL
MaterialSTEEL COMP 630 RING
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Distance From Head Largest Bearing Surface to Shank Hole Center1.008 INCHES NOMINAL OVERALL IN
Head Diameter0.577 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
ST3M736-5-10 PRIMARY The Boeing Company Div Defense (USA)
Reference documents
ReferenceMeaning
121672-5-10 5/2 Secondary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-626-8200?

NSN 5305-01-626-8200 is a Screw,close Tolerance, manufactured by The Boeing Company Div Defense, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-01-626-8200?

NSN 5305-01-626-8200 has 1 manufacturer part number on file: ST3M736-5-10 (The Boeing Company Div Defense).

What are the specifications of ST3M736-5-10?

Key specifications for ST3M736-5-10: Surface Finish: 63.0 MICROINCHES GRIP; Surface Finish: 63.0 MICROINCHES BEARING SURFACE OF HEAD; Fastener Length: 1.113 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-416, TYPE II, CLASS 2 FED STD SINGLE TREATMENT RESPONSE OVERALL. 27 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-626-8200 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com