The Screw,machine, cataloged under National Stock Number 5305-01-626-1756, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-626-1756 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Fastener Length | 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN |
| Screw Material Document and Classification | FED-STD-66 FED STD ALL MATERIAL RESPONSES |
| Thread Length | 0.515 INCHES NOMINAL IN |
| Nominal Thread Diameter | 0.2500 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
| Minimum Tensile Strength | 2540 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE III |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 20 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.442 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS24693-C95 | 5/9 Secondary reference U.S. Government activity |
| MS24693-C95 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-626-1756 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-626-1756: Fastener Length: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN; Screw Material Document and Classification: FED-STD-66 FED STD ALL MATERIAL RESPONSES; Thread Length: 0.515 INCHES NOMINAL IN; Nominal Thread Diameter: 0.2500 INCHES IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.