The Screw,close Tolerance, cataloged under National Stock Number 5305-01-624-3036, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Mcmaster-Carr Supply Co. Government technical data includes 15 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-624-3036 |
| Primary Part Number | 90278A410 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Mcmaster-Carr Supply Co |
| Status | ACTIVE |
| Width Across Flats | 3.0 MILLIMETERS NOMINAL MM |
| Head Height | 5.0 MILLIMETERS NOMINAL MM |
| Fastener Length | 30.00 MILLIMETERS MINIMUM AND 30.05 MILLIMETERS MAXIMUM MM |
| Thread Pitch in Millimeters | 0.8 |
| Thread Length | 6.0 MILLIMETERS NOMINAL MM |
| Nominal Thread Diameter | 5.0 MILLIMETERS MM |
| Head Style | FILLISTER |
| Thread Direction | RIGHT-HAND |
| Grip Length | 24.0 MILLIMETERS NOMINAL MM |
| Grip Diameter | 5.975 MILLIMETERS MINIMUM AND 6.025 MILLIMETERS MAXIMUM MM |
| Internal Drive Style | HEXAGON |
| Thread Class | 6G G |
| Material | STEEL COMP 304 OVERALL |
| Thread Series Designator | M |
| Head Diameter | 10.0 MILLIMETERS NOMINAL MM |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 90278A410 PRIMARY | Mcmaster-Carr Supply Co (USA) |
NSN 5305-01-624-3036 is a Screw,close Tolerance, manufactured by Mcmaster-Carr Supply Co, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-624-3036 has 1 manufacturer part number on file: 90278A410 (Mcmaster-Carr Supply Co).
Key specifications for 90278A410: Width Across Flats: 3.0 MILLIMETERS NOMINAL MM; Head Height: 5.0 MILLIMETERS NOMINAL MM; Fastener Length: 30.00 MILLIMETERS MINIMUM AND 30.05 MILLIMETERS MAXIMUM MM; Thread Pitch in Millimeters: 0.8. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.