The Screw,machine, cataloged under National Stock Number 5305-01-609-7816, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-609-7816 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.133 INCHES NOMINAL IN |
| Bearing Surface of Head Surface Finish | 32.0 MICROINCHES |
| Screw Surface Treatment | PASSIVATE |
| Fastener Length | 1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN |
| Screw Material Document and Classification | CRES A286 PER AMS5737 NATIONAL SPEC SINGLE MATERIAL RESPONSE |
| Thread Length | 0.971 INCHES NOMINAL IN |
| Nominal Thread Diameter | 0.3125 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Thread Surface Finish | 32.0 MICROINCHES |
| Specification/standard Data | 80205-NAS1102 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Screw Material | STEEL CORROSION RESISTING |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | TORQUE SET |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.617 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1102E5R18 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-609-7816 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-609-7816: Head Height: 0.133 INCHES NOMINAL IN; Bearing Surface of Head Surface Finish: 32.0 MICROINCHES; Screw Surface Treatment: PASSIVATE; Fastener Length: 1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.