The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-596-5026, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Mcmaster-Carr Supply Co. Government technical data includes 17 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-596-5026 |
| Primary Part Number | 91294A212 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Mcmaster-Carr Supply Co |
| Status | ACTIVE |
| Width Across Flats | 3.0 MILLIMETERS NOMINAL MM |
| External Thread Tolerance Class | 6G G |
| Fastener Length | 13.2 MILLIMETERS NOMINAL MM |
| Thread Pitch in Millimeters | 0.8 |
| Thread Length | 13.2 MILLIMETERS NOMINAL MM |
| Hardness Rating | 32.0 ROCKWELL C MINIMUM OVERALL |
| Nominal Thread Diameter | 5.0 MILLIMETERS MM |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Color | BLACK OVERALL |
| Surface Treatment | OXIDE OVERALL |
| Minimum Tensile Strength | 142000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Countersink Angle | 90.0 DEGREES NOMINAL |
| Material | STEEL OVERALL |
| Thread Series Designator | M |
| Head Diameter | 2.8 MILLIMETERS NOMINAL MM |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 91294A212 PRIMARY | Mcmaster-Carr Supply Co (USA) |
NSN 5305-01-596-5026 is a Screw,cap,socket Head, manufactured by Mcmaster-Carr Supply Co, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-596-5026 has 1 manufacturer part number on file: 91294A212 (Mcmaster-Carr Supply Co).
Key specifications for 91294A212: Width Across Flats: 3.0 MILLIMETERS NOMINAL MM; External Thread Tolerance Class: 6G G; Fastener Length: 13.2 MILLIMETERS NOMINAL MM; Thread Pitch in Millimeters: 0.8. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.