The Screw,close Tolerance, cataloged under National Stock Number 5305-01-594-6978, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 26 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-594-6978 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 125.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Surface Finish | 125.0 MICROINCHES HEAD |
| Head Height | 0.088 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN |
| Fastener Length | 0.636 INCHES MINIMUM AND 0.666 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.276 INCHES NOMINAL IN |
| Hole Configuration Style | ROUND |
| Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.1640 INCHES IN |
| Head Style | FLAT FILLISTER |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS1121 THRU 1128 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Grip Diameter | 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL |
| Hole Quantity | 1 |
| Thread Series Designator | UNJC |
| Hole Type | DRILLED |
| Hole Diameter | 0.034 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN |
| Head Diameter | 0.265 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1122-6H | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-594-6978 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-594-6978: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 125.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Surface Finish: 125.0 MICROINCHES HEAD. 26 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.