The Screw,close Tolerance, cataloged under National Stock Number 5305-01-581-9150, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-581-9150 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Fastener Length | 0.786 INCHES MINIMUM AND 0.816 INCHES MAXIMUM IN |
| Thread Length | 0.338 INCHES MINIMUM AND 0.388 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN |
| Grip Diameter | 0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | IRON ALLOY 660 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.258 INCHES MINIMUM AND 0.305 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 933.45.20.007 | 5/9 Secondary reference Pilatus Aircraft Ltd |
| 5305PL1885266 | 6/9 Informative reference only Jednolity Indeks Materialowy - Uniform Material Index |
| NAS1581C3T7P | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-581-9150 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-581-9150: Fastener Length: 0.786 INCHES MINIMUM AND 0.816 INCHES MAXIMUM IN; Thread Length: 0.338 INCHES MINIMUM AND 0.388 INCHES MAXIMUM IN; Nominal Thread Diameter: 0.190 INCHES IN; Head Style: FLAT COUNTERSUNK. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.