The Screw,close Tolerance, cataloged under National Stock Number 5305-01-545-5809, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-545-5809 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Fastener Length | 0.667 INCHES MINIMUM AND 0.697 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE OVERALL |
| Thread Length | 0.370 INCHES NOMINAL IN |
| Material Document and Classification | AMS5731 ASSN STD 1ST MATERIAL RESPONSE OR AMS5732 ASSN STD 1ST MATERIAL RESPONSE OR AMS5737 ASSN STD 1ST MATERIAL RESPONSE OR AMS5738 ASSN STD 1ST MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN |
| Grip Diameter | 0.249 INCHES NOMINAL IN |
| Surface Treatment | PASSIVATE OVERALL |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | IRON ALLOY 660 OVERALL |
| Thread Series Designator | UNF |
| Head Diameter | 0.456 INCHES MINIMUM AND 0.508 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS7504U5 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-545-5809 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-545-5809: Fastener Length: 0.667 INCHES MINIMUM AND 0.697 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE OVERALL; Thread Length: 0.370 INCHES NOMINAL IN; Material Document and Classification: AMS5731 ASSN STD 1ST MATERIAL RESPONSE OR AMS5732 ASSN STD 1ST MATERIAL RESPONSE OR AMS5737 ASSN STD 1ST MATERIAL RESPONSE OR AMS5738 ASSN STD 1ST MATERIAL RESPONSE OVERALL. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.