The Screw,cap,hexagon Head, cataloged under National Stock Number 5305-01-533-4145, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-533-4145 |
| Item Name | Screw,cap,hexagon Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM IN |
| Fastener Length | 1.393 INCHES MINIMUM AND 1.483 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | ASTM B633 TYP 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.938 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN |
| Hardness Rating | 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| Hole Configuration Style | HEXAGON FLATS |
| Material Document and Classification | SAE GR 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.750 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Width Between Flats | 1.100 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN |
| Surface Treatment | ZINC AND CHROMATE OVERALL |
| Minimum Tensile Strength | 150000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 16 |
| Material | STEEL OVERALL |
| Hole Quantity | 1 |
| Thread Series Designator | UNF |
| Hole Type | DRILLED |
| Hole Diameter | 0.094 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| B1821BH075F100D | 3/2 Design control — primary reference U.S. Government activity |
| MS18153-157 | 5/9 Secondary reference U.S. Government activity |
NSN 5305-01-533-4145 is a Screw,cap,hexagon Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-533-4145: Head Height: 0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM IN; Fastener Length: 1.393 INCHES MINIMUM AND 1.483 INCHES MAXIMUM IN; Surface Treatment Document and Classification: ASTM B633 TYP 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.938 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.