The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-525-5100, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-525-5100 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN |
| Head Height | 0.250 INCHES NOMINAL IN |
| Fastener Length | 2.440 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 1.690 INCHES MINIMUM AND 2.135 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 0.500 INCHES IN |
| Head Style | FLAT FILLISTER |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Minimum Yield Strength | 130000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL CORROSION RESISTING OVERALL |
| Thread Series Designator | UNF |
| Head Diameter | 0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 9139918-01 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-525-5100 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-525-5100: Width Across Flats: 0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN; Head Height: 0.250 INCHES NOMINAL IN; Fastener Length: 2.440 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.