The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-522-0145, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-522-0145 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.141 INCHES NOMINAL IN |
| Head Height | 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN |
| Fastener Length | 0.500 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.875 INCHES NOMINAL IN |
| Hole Configuration Style | ROUND INTERNAL HEXAGON |
| Material Document and Classification | FF-S-86 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.1640 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 2650 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 36 |
| Material | STEEL OVERALL |
| Hole Quantity | 1 |
| Thread Series Designator | UNRF |
| Hole Type | DRILLED |
| Hole Diameter | 0.044 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN |
| Head Diameter | 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1351-08H8 | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-01-522-0145 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-522-0145: Width Across Flats: 0.141 INCHES NOMINAL IN; Head Height: 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN; Fastener Length: 0.500 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.