The Screw,close Tolerance, cataloged under National Stock Number 5305-01-516-2422, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-516-2422 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| Fastener Length | 0.613 INCHES NOMINAL IN |
| Thread Length | 0.363 INCHES NOMINAL IN |
| Material Document and Classification | MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OR AMS6415 ASSN STD SINGLE MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | PAN |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Grip Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP E4340 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.360 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1578C3R4 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-516-2422 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-516-2422: Head Height: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN; Fastener Length: 0.613 INCHES NOMINAL IN; Thread Length: 0.363 INCHES NOMINAL IN; Material Document and Classification: MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OR AMS6415 ASSN STD SINGLE MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.