The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-509-0649, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is International Organization for Standardization (iso). Government technical data includes 15 specifications, cited from the U.S. Government catalog. The record lists 5 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-509-0649 |
| Primary Part Number | ISO10642-M5X20-A4-80 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | International Organization for Standardization (iso) |
| Status | ACTIVE |
| Width Across Flats | 3.0 MILLIMETERS NOMINAL MM |
| External Thread Tolerance Class | 6G G |
| Fastener Length | 20.0 MILLIMETERS NOMINAL MM |
| Thread Pitch in Millimeters | 0.80 |
| Thread Length | 13.7 MILLIMETERS NOMINAL MM |
| Nominal Thread Diameter | 5.0 MILLIMETERS MM |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Minimum Tensile Strength | 100000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Countersink Angle | 90.0 DEGREES NOMINAL |
| Test Data Document | I9008-ISO 898/1 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Material | STEEL COMP 316 OVERALL |
| Thread Series Designator | ISO M |
| Head Diameter | 10.0 MILLIMETERS NOMINAL MM |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 0446 3553 | Blackwood J. Blackwood & Son Pty Ltd (AUS) |
| 3252 | James Glen Pty Ltd (AUS) |
| 5X20MG316FSS | United Fasteners Sa Pty Ltd (AUS) |
| ENISO10642-M5X20-A4-80 | Comite Europeen De Normalisation (BEL) |
| ISO10642-M5X20-A4-80 PRIMARY | International Organization for Standardization (iso) (CHE) |
| Reference | Meaning |
|---|---|
| DIN7991-M5 | 5/1 Secondary reference Din Deutsches Institut Fur Normung Ev |
| DIN7991-M5X20-A4-80 | 5/9 Secondary reference Din Deutsches Institut Fur Normung Ev |
NSN 5305-01-509-0649 is a Screw,cap,socket Head, manufactured by International Organization for Standardization (iso), classified under FSC 5305, Screws. Status: active.
NSN 5305-01-509-0649 has 5 manufacturer part numbers on file: 0446 3553 (Blackwood J. Blackwood & Son Pty Ltd), 3252 (James Glen Pty Ltd), 5X20MG316FSS (United Fasteners Sa Pty Ltd), ENISO10642-M5X20-A4-80 (Comite Europeen De Normalisation), ISO10642-M5X20-A4-80 (International Organization for Standardization (iso)).
Key specifications for ISO10642-M5X20-A4-80: Width Across Flats: 3.0 MILLIMETERS NOMINAL MM; External Thread Tolerance Class: 6G G; Fastener Length: 20.0 MILLIMETERS NOMINAL MM; Thread Pitch in Millimeters: 0.80. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.