The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-507-5467, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-507-5467 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Surface Finish | 125.0 MICROINCHES OVERALL |
| Width Across Flats | 0.125 INCHES NOMINAL IN |
| Fastener Length | 0.375 INCHES MAXIMUM IN |
| Thread Length | 0.248 INCHES MAXIMUM IN |
| Hardness Rating | 80.0 ROCKWELL B MINIMUM OVERALL |
| Material Document and Classification | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Minimum Tensile Strength | 80000 POUNDS PER SQUARE INCH LBS |
| Minimum Yield Strength | 30000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Countersink Angle | 82.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OR STEEL COMP XM-7 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NASM24671-19 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-507-5467 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-507-5467: Surface Finish: 125.0 MICROINCHES OVERALL; Width Across Flats: 0.125 INCHES NOMINAL IN; Fastener Length: 0.375 INCHES MAXIMUM IN; Thread Length: 0.248 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.