The Screw,close Tolerance, cataloged under National Stock Number 5305-01-494-4076, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-494-4076 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Fastener Length | 1.363 INCHES MINIMUM AND 1.393 INCHES MAXIMUM IN |
| Thread Length | 0.316 INCHES NOMINAL IN |
| Shank Unthreaded Hole Diameter | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN |
| Grip Diameter | 0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL CORROSION RESISTING OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 0.946 INCHES NOMINAL FIRST HOLE IN |
| Head Diameter | 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1154E17D | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-494-4076 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-494-4076: Fastener Length: 1.363 INCHES MINIMUM AND 1.393 INCHES MAXIMUM IN; Thread Length: 0.316 INCHES NOMINAL IN; Shank Unthreaded Hole Diameter: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN; Nominal Thread Diameter: 0.250 INCHES IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.