The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-472-1883, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is U S Army Tank Automotive Command Amsta-Im-Mm. Government technical data includes 12 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-472-1883 |
| Primary Part Number | 12387270-191 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | U S Army Tank Automotive Command Amsta-Im-Mm |
| Status | ACTIVE |
| Head Height | 0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-STD-171,1.9.2.3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 2.250 INCHES NOMINAL IN |
| Nominal Thread Diameter | 0.750 INCHES IN |
| Thread Direction | RIGHT-HAND |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Minimum Yield Strength | 150000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 10 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 1.107 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 12387270-191 PRIMARY | U S Army Tank Automotive Command Amsta-Im-Mm (USA) |
NSN 5305-01-472-1883 is a Screw,cap,socket Head, manufactured by U S Army Tank Automotive Command Amsta-Im-Mm, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-472-1883 has 1 manufacturer part number on file: 12387270-191 (U S Army Tank Automotive Command Amsta-Im-Mm).
Key specifications for 12387270-191: Head Height: 0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-STD-171,1.9.2.3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 2.250 INCHES NOMINAL IN; Nominal Thread Diameter: 0.750 INCHES IN. 12 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.