The Screw,close Tolerance, cataloged under National Stock Number 5305-01-468-0540, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-468-0540 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Fastener Length | 1.969 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.469 INCHES NOMINAL IN |
| Material Document and Classification | MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.500 INCHES NOMINAL IN |
| Grip Diameter | 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE II |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP 4140 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS334CP17-5 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-468-0540 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-468-0540: Fastener Length: 1.969 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.469 INCHES NOMINAL IN; Material Document and Classification: MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.