The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-467-2330, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-467-2330 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.225 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN |
| Head Height | 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Fastener Length | 2.190 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN |
| Thread Length | 1.000 INCHES NOMINAL IN |
| Hole Configuration Style | ROUND INTERNAL HEXAGON |
| Material Document and Classification | FF-S-86 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.2500 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | CADMIUM OVERALL |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL OVERALL |
| Hole Quantity | 6 |
| Thread Series Designator | UNRF |
| Hole Type | DRILLED |
| Hole Diameter | 0.044 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN |
| Head Diameter | 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1351-4H36P | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-467-2330 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-467-2330: Width Across Flats: 0.225 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN; Head Height: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; Fastener Length: 2.190 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN; Thread Length: 1.000 INCHES NOMINAL IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.