PartsTable TECHNICAL DATA SHEET
NSN 5305-01-466-2658Government record, cited

Screw, Cap, Socket Head5305-01-466-2658

NSN 5305-01-466-2658 · NIIN 014662658 · Part number ISO10642-M16X40-8.8-A3C
International Organization for Standardization (iso) · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE I9008
Government record, cited
NSN 5305-01-466-2658 — this item is cataloged by the U.S. Government under National Stock Number 5305-01-466-2658. Manufacturer of record part number: ISO10642-M16X40-8.8-A3C.
Also searched as  5305-01-466-2658 · 5305014662658 · NIIN 014662658 · 01-466-2658 · FSC 5305 Screws · CAGE I9008 · ISO10642-M16X40-8.8-A3C · DIN7991-M16X40-8.8-A3C
Nearby stock numbers  ·
Features
  • Screw,cap,socket Head — FSC 5305
  • Width Across Flats: 10.0 MILLIMETERS NOMINAL MM
  • External Thread Tolerance Class: 6G G
  • Fastener Length: 39.5 MILLIMETERS MINIMUM AND 40.5 MILLIMETERS MAXIMUM MM
  • Surface Treatment Document and Classification: ISO 4042 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Pitch in Millimeters: 2.0
  • Thread Length: 33.5 MILLIMETERS MINIMUM MM
  • Material Document and Classification: ISO 898-1 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
Identification
  • NSN: 5305-01-466-2658
  • NIIN: 014662658
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: ISO10642-M16X40-8.8-A3C
  • Manufacturer: International Organization for Standardization (iso)
General Description

The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-466-2658, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is International Organization for Standardization (iso). Government technical data includes 17 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-466-2658
Primary Part NumberISO10642-M16X40-8.8-A3C
Item NameScrew,cap,socket Head
FSC / FSG5305 / 53 — Screws
ManufacturerInternational Organization for Standardization (iso)
StatusACTIVE
Width Across Flats10.0 MILLIMETERS NOMINAL MM
External Thread Tolerance Class6G G
Fastener Length39.5 MILLIMETERS MINIMUM AND 40.5 MILLIMETERS MAXIMUM MM
Surface Treatment Document and ClassificationISO 4042 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Pitch in Millimeters2.0
Thread Length33.5 MILLIMETERS MINIMUM MM
Material Document and ClassificationISO 898-1 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter16.0 MILLIMETERS MM
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Surface TreatmentZINC AND CHROMATE OVERALL
Minimum Tensile Strength113784 POUNDS PER SQUARE INCH LBS
Internal Drive StyleHEXAGON
Countersink Angle90.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM
MaterialSTEEL PROPERTY CLASS 8.8 OVERALL
Thread Series DesignatorM
Head Diameter29.01 MILLIMETERS MINIMUM AND 33.60 MILLIMETERS MAXIMUM MM
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
ISO10642-M16X40-8.8-A3C PRIMARY International Organization for Standardization (iso) (CHE)
Reference documents
ReferenceMeaning
DIN7991-M16X40-8.8-A3C 5/9 Secondary reference
Din Deutsches Institut Fur Normung Ev
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016
5305-00-001-5016 · Item name not on file
5305-00-001-9160
5305-00-001-9160 · Item name not on file
5305-00-001-9629
SCREW,ADJUSTING CLEVIS
5305-00-001-9742
5305-00-001-9742 · Item name not on file
5305-00-001-9768
SCREW,CAP,SOCKET HEAD
5305-00-003-4306
SCREW,MACHINE
5305-00-003-6694
5305-00-003-6694 · Item name not on file
5305-00-003-6753
5305-00-003-6753 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-466-2658?

NSN 5305-01-466-2658 is a Screw,cap,socket Head, manufactured by International Organization for Standardization (iso), classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-01-466-2658?

NSN 5305-01-466-2658 has 1 manufacturer part number on file: ISO10642-M16X40-8.8-A3C (International Organization for Standardization (iso)).

What are the specifications of ISO10642-M16X40-8.8-A3C?

Key specifications for ISO10642-M16X40-8.8-A3C: Width Across Flats: 10.0 MILLIMETERS NOMINAL MM; External Thread Tolerance Class: 6G G; Fastener Length: 39.5 MILLIMETERS MINIMUM AND 40.5 MILLIMETERS MAXIMUM MM; Surface Treatment Document and Classification: ISO 4042 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL. 17 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-466-2658 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com