The Screw,close Tolerance, cataloged under National Stock Number 5305-01-451-9106, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-451-9106 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Fastener Length | 1.241 INCHES MINIMUM AND 1.261 INCHES MAXIMUM IN |
| Thread Length | 0.501 INCHES NOMINAL IN |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN |
| Grip Diameter | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HIGH-TORQUE |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.4289 INCHES MINIMUM AND 0.4787 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS15815T12 | 3/2 Design control — primary reference U.S. Government activity |
| NAS1581F5T12 | 5/9 Secondary reference U.S. Government activity |
NSN 5305-01-451-9106 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-451-9106: Fastener Length: 1.241 INCHES MINIMUM AND 1.261 INCHES MAXIMUM IN; Thread Length: 0.501 INCHES NOMINAL IN; Nominal Thread Diameter: 0.312 INCHES IN; Head Style: FLAT COUNTERSUNK. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.