The Screw,machine, cataloged under National Stock Number 5305-01-449-7948, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-449-7948 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Screw Surface Treatment | CADMIUM OR CADMIUM AND CHROMATE |
| Fastener Length | 4.531 INCHES MINIMUM AND 4.625 INCHES MAXIMUM IN |
| Screw Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE |
| Thread Length | 4.492 INCHES NOMINAL IN |
| Nominal Thread Diameter | 0.3125 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS1102 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Screw Material | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | TORQUE SET |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.617 INCHES MINIMUM AND 0.637 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416 TY II, CL 2 FED SPEC ALL TREATMENT RESPONSES |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1102-5-74 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-449-7948 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-449-7948: Screw Surface Treatment: CADMIUM OR CADMIUM AND CHROMATE; Fastener Length: 4.531 INCHES MINIMUM AND 4.625 INCHES MAXIMUM IN; Screw Material Document and Classification: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE; Thread Length: 4.492 INCHES NOMINAL IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.