The Screw,close Tolerance, cataloged under National Stock Number 5305-01-438-2255, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-438-2255 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Fastener Length | 1.263 INCHES MINIMUM AND 1.293 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416, TYPE 2, CLASS2 FED SPEC ALL TREATMENT RESPONSES OVERALL |
| Thread Length | 0.403 INCHES MAXIMUM IN |
| Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS1581 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN |
| Grip Diameter | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.3504 INCHES MINIMUM AND 0.3988 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1581F4T14 | 3/2 Design control — primary reference U.S. Government activity |
| 5305PL0784947 | 6/9 Informative reference only Jednolity Indeks Materialowy - Uniform Material Index |
NSN 5305-01-438-2255 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-438-2255: Fastener Length: 1.263 INCHES MINIMUM AND 1.293 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416, TYPE 2, CLASS2 FED SPEC ALL TREATMENT RESPONSES OVERALL; Thread Length: 0.403 INCHES MAXIMUM IN; Material Document and Classification: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.