The Screw,machine, cataloged under National Stock Number 5305-01-432-2935, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-432-2935 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.116 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN |
| Screw Surface Treatment | PASSIVATE |
| Fastener Length | 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Screw Material Document and Classification | QQ-S-763 300 SERIES FED SPEC SINGLE MATERIAL RESPONSE OR FED-STD66 300 SERIES FED STD SINGLE MATERIAL RESPONSE |
| Thread Length | 0.099 INCHES MINIMUM AND 0.259 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | FLAT COUNTERSUNK UNDERCUT |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL CORROSION RESISTING |
| Minimum Tensile Strength | 80000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 18 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.568 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FF-S-92 | 4/1 Identification reference U.S. Government activity |
| MS51959-92 | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-01-432-2935 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-432-2935: Head Height: 0.116 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN; Screw Surface Treatment: PASSIVATE; Fastener Length: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN; Screw Material Document and Classification: QQ-S-763 300 SERIES FED SPEC SINGLE MATERIAL RESPONSE OR FED-STD66 300 SERIES FED STD SINGLE MATERIAL RESPONSE. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.