The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-424-9416, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-424-9416 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.1562 INCHES MINIMUM AND 0.1582 INCHES MAXIMUM IN |
| Fastener Length | 0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416-TY 2, CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL |
| Thread Length | 1.000 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Internal Drive Style | HEXAGON |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNF |
| Head Diameter | 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 16990-4F-16D | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| MS24668-13L | 5/9 Secondary reference U.S. Government activity |
| 16990*4F-16D | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-424-9416 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-424-9416: Width Across Flats: 0.1562 INCHES MINIMUM AND 0.1582 INCHES MAXIMUM IN; Fastener Length: 0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416-TY 2, CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL; Thread Length: 1.000 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.