The Screw,machine, cataloged under National Stock Number 5305-01-421-0486, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-421-0486 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Bearing Surface of Head Surface Finish | 32.0 MICROINCHES |
| Fastener Length | 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN |
| Screw Material Document and Classification | AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE |
| Thread Length | 1.046 INCHES MINIMUM AND 1.170 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Thread Surface Finish | 32.0 MICROINCHES |
| Specification/standard Data | 80205-NAS1102 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Screw Material | TITANIUM ALLOY UNS R56400 |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | TORQUE SET |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.322 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1102V3-20 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-421-0486 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-421-0486: Bearing Surface of Head Surface Finish: 32.0 MICROINCHES; Fastener Length: 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN; Screw Material Document and Classification: AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE; Thread Length: 1.046 INCHES MINIMUM AND 1.170 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.