The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-414-8909, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies, Llc Dba PB Fasteners. Government technical data includes 14 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-414-8909 |
| Primary Part Number | 20097-5F-60Z |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Sps Technologies, Llc Dba PB Fasteners |
| Status | ACTIVE |
| Width Across Flats | 0.312 INCHES NOMINAL IN |
| Head Height | 0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Fastener Length | 3.750 INCHES NOMINAL IN |
| Thread Length | 3.750 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | ZINC OVERALL |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.457 INCHES MINIMUM AND 0.468 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 20097-5F-60Z | Sps Technologies Afg Div (USA) |
| 20097-5F-60Z PRIMARY | Sps Technologies, Llc Dba PB Fasteners (USA) |
NSN 5305-01-414-8909 is a Screw,cap,socket Head, manufactured by Sps Technologies, Llc Dba PB Fasteners, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-414-8909 has 2 manufacturer part numbers on file: 20097-5F-60Z (Sps Technologies Afg Div), 20097-5F-60Z (Sps Technologies, Llc Dba PB Fasteners).
Key specifications for 20097-5F-60Z: Width Across Flats: 0.312 INCHES NOMINAL IN; Head Height: 0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN; Fastener Length: 3.750 INCHES NOMINAL IN; Thread Length: 3.750 INCHES MAXIMUM IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.