The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-399-0170, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-399-0170 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.156 INCHES NOMINAL IN |
| Fastener Length | 1.960 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | ASTM B633, TYPE 2, CLASS FE/ZN 5 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 1.250 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN |
| Hardness Rating | 39.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | ASTM A574 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | ZINC OVERALL |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.480 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS24667-35Z | 3/2 Design control — primary reference U.S. Government activity |
| MS24667-35Z | 5/9 Secondary reference U.S. Government activity |
NSN 5305-01-399-0170 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-399-0170: Width Across Flats: 0.156 INCHES NOMINAL IN; Fastener Length: 1.960 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN; Surface Treatment Document and Classification: ASTM B633, TYPE 2, CLASS FE/ZN 5 ASSN STD SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 1.250 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.