The Screw,close Tolerance, cataloged under National Stock Number 5305-01-396-1002, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-396-1002 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Fastener Length | 4.111 INCHES MINIMUM AND 4.141 INCHES MAXIMUM IN |
| Thread Length | 0.501 INCHES NOMINAL IN |
| Shank Unthreaded Hole Diameter | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS1580 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 3.624 INCHES MINIMUM AND 3.635 INCHES MAXIMUM IN |
| Grip Diameter | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL CORROSION RESISTING OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 4.006 INCHES NOMINAL GRIP IN |
| Head Diameter | 0.578 INCHES MINIMUM AND 0.633 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1580C5R58D | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-396-1002 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-396-1002: Fastener Length: 4.111 INCHES MINIMUM AND 4.141 INCHES MAXIMUM IN; Thread Length: 0.501 INCHES NOMINAL IN; Shank Unthreaded Hole Diameter: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN; Nominal Thread Diameter: 0.312 INCHES IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.