PartsTable TECHNICAL DATA SHEET
NSN 5305-01-393-7110Government record, cited

Screw, Assembled Washer5305-01-393-7110

NSN 5305-01-393-7110 · NIIN 013937110 · Part number 0441C0097-20
Lockheed Martin Corporation Div Rms · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 03538
Government record, cited
NSN 5305-01-393-7110 — this item is cataloged by the U.S. Government under National Stock Number 5305-01-393-7110. Manufacturer of record part number: 0441C0097-20.
Also searched as  5305-01-393-7110 · 5305013937110 · NIIN 013937110 · 01-393-7110 · FSC 5305 Screws · CAGE 03538 · 0441C0097-20
Nearby stock numbers  ·
Features
  • Screw,assembled Washer — FSC 5305
  • Head Height: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
  • Fastener Length: 0.380 INCHES NOMINAL IN
  • Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
  • Primary Washer Outside Diameter: 0.139 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
  • Thread Length: 0.380 INCHES NOMINAL IN
  • Material Document and Classification: QQ-P-763, 300 SERIES FED SPEC SINGLE MATERIAL RESPONSE FASTENER
  • Nominal Thread Diameter: 0.138 INCHES IN
Identification
  • NSN: 5305-01-393-7110
  • NIIN: 013937110
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 0441C0097-20
  • Manufacturer: Lockheed Martin Corporation Div Rms
General Description

The Screw,assembled Washer, cataloged under National Stock Number 5305-01-393-7110, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Lockheed Martin Corporation Div Rms. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-393-7110
Primary Part Number0441C0097-20
Item NameScrew,assembled Washer
FSC / FSG5305 / 53 — Screws
ManufacturerLockheed Martin Corporation Div Rms
StatusACTIVE
Head Height0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
Fastener Length0.380 INCHES NOMINAL IN
Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
Primary Washer Outside Diameter0.139 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
Thread Length0.380 INCHES NOMINAL IN
Material Document and ClassificationQQ-P-763, 300 SERIES FED SPEC SINGLE MATERIAL RESPONSE FASTENER
Nominal Thread Diameter0.138 INCHES IN
Head StylePAN
Primary Washer StyleFINISHING
Thread DirectionRIGHT-HAND
Primary Washer Material Thickness0.013 INCHES MINIMUM AND 0.017 INCHES MAXIMUM IN
Surface TreatmentPASSIVATE FASTENER
Internal Drive StyleCROSS RECESS TYPE 1
Thread Class2A A
Thread Quantity Per Inch32
MaterialSTEEL FASTENER
MaterialPLASTIC POLYAMIDE NYLON SECONDARY WASHER
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Washer Quantity1
Head Diameter0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
0441C0097-20 PRIMARY Lockheed Martin Corporation Div Rms (USA)
Reference documents
ReferenceMeaning
0441C0097-20 5/9 Secondary reference
Martin Marietta Technologies Inc Sub of Martin Marietta Corp Aero and Naval Systems
0441C0097-20 5/9 Secondary reference
Hydroscience Technologies Inc
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-393-7110?

NSN 5305-01-393-7110 is a Screw,assembled Washer, manufactured by Lockheed Martin Corporation Div Rms, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-01-393-7110?

NSN 5305-01-393-7110 has 1 manufacturer part number on file: 0441C0097-20 (Lockheed Martin Corporation Div Rms).

What are the specifications of 0441C0097-20?

Key specifications for 0441C0097-20: Head Height: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN; Fastener Length: 0.380 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER; Primary Washer Outside Diameter: 0.139 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN. 20 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-393-7110 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com