PartsTable TECHNICAL DATA SHEET
NSN 5305-01-392-5109Government record, cited

Screw, Cap, Socket Head5305-01-392-5109

NSN 5305-01-392-5109 · NIIN 013925109
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-01-392-5109 · 5305013925109 · NIIN 013925109 · 01-392-5109 · FSC 5305 Screws · RW-178397 ITEM 3.6 · 807166-70 · 807166-70 · RY-180239 ITEM 3.6 · RW-178397 ITEM 3.6
Nearby stock numbers  ·
Features
  • Screw,cap,socket Head — FSC 5305
  • Width Across Flats: 0.188 INCHES NOMINAL IN
  • Head Height: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
  • Fastener Length: 2.620 INCHES NOMINAL IN
  • Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 1.000 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
  • Hardness Rating: 80.0 ROCKWELL B MINIMUM OVERALL
  • Material Document and Classification: FED 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
Identification
  • NSN: 5305-01-392-5109
  • NIIN: 013925109
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-392-5109, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-392-5109
Item NameScrew,cap,socket Head
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Width Across Flats0.188 INCHES NOMINAL IN
Head Height0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
Fastener Length2.620 INCHES NOMINAL IN
Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length1.000 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
Hardness Rating80.0 ROCKWELL B MINIMUM OVERALL
Material Document and ClassificationFED 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.250 INCHES IN
Head StyleFLAT CHAMFER
Thread DirectionRIGHT-HAND
Surface TreatmentPASSIVATE OVERALL
Minimum Tensile Strength80000 POUNDS PER SQUARE INCH LBS
Minimum Yield Strength30000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleHEXAGON
Thread Class2A A
Thread Quantity Per Inch20
MaterialSTEEL COMP 316 OVERALL
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Head Diameter0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
RW-178397 ITEM 3.6 C/1 Advisory reference — outside the item-of-supply concept
Curtiss-Wright Electro-Mechanical Corporation Div Epd
807166-70 5/9 Secondary reference
U.S. Government activity
807166-70 C/1 Advisory reference — outside the item-of-supply concept
Curtiss-Wright Electro-Mechanical Corporation Div Epd
RY-180239 ITEM 3.6 3/9 Design control — primary reference
U.S. Government activity
RW-178397 ITEM 3.6 5/9 Secondary reference
U.S. Government activity
RY-180239 ITEM 3.6 C/1 Advisory reference — outside the item-of-supply concept
Curtiss-Wright Electro-Mechanical Corporation Div Epd
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-392-5109?

NSN 5305-01-392-5109 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.

What are the specifications of 5305-01-392-5109?

Key specifications for 5305-01-392-5109: Width Across Flats: 0.188 INCHES NOMINAL IN; Head Height: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; Fastener Length: 2.620 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 19 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-392-5109 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com